FlaskScrubber® Vantage™ Series Glassware Washers are designed to wash and dry narrow-neck and general purpose glassware and have specialized features for contamination-sensitive research. Adjustable cycle programs give the user full control in setting the right combination of water temperature, detergent and rinse aid amounts, wash and rinse times, and number of rinses. Memory stores both factory set and user set programs for reproducible protocols. The RS-232 port provides a means to document settings and actual washing conditions. The unique viewing window with light lets you see each cycle in progress. Temperatures up to 93° C (199° F) may be programmed for wash and rinse cycles to remove lipids and sanitize glassware. Up to 6 purified water rinses may be programmed to ensure that no water soluble contaminants are introduced. The forced air drying system incorporates a 99.97% efficient HEPA filter to remove airborne particulates. The result is thoroughly clean, dry labware, ready for use in sensitive research. Specialized inserts for pipettes, BOD bottles, petri dishes, culture tubes and small utensils enhance the washer's versatility. The washer may be outfitted with an Upper Standard or Spindle Rack to increase capacity. In addition, a Lower Standard Rack may be used instead of the Lower Spindle Rack. (Additional racks and baskets are sold separately).

Features
• Patent-pending design
• Lower spindle rack, of Type 304 stainless steel, with 36 detachable large spindles for washing narrow-neck glassware. Rack accommodates a variety of inserts for holding beakers, culture tubes and other specialty glassware (inserts sold separately).
• 18 glassware holders, 36 clips and 10 additional interchangeable small spindles.
• Water temperature reaches 93° C (199° F) to sanitize glassware and for enhanced washing and faster drying.
• LCD information center for customizing cycles and monitoring operation, including internal water temperature (° C or ° F)
• Water recirculation rates of 96 gal/min (363 liters/min) when operated on 230 Volt, 50 Hz models and 112 gal/min (424 liters/min) on 230 Volt, 60 Hz for thorough cleaning
• Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
• Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses
• Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware
• Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal
• RS-232 port for monitoring washer operation on a user-supplied computer or recorder
• Automatic liquid detergent dispenser with peristaltic pump
• Automatic rinse aid dispenser
• Manual-fill detergent dispenser for powder or liquid detergent
• Manual-fill rinse solution dispenser
• Built-in, HEPA-filtered forced air drying through the spindles up to 99 minutes and programmable from 38-70°C (100-158° F). HEPA filter is 99.97% efficient on particulates 0.3 micron.
• 10 factory-set cycle programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, INTENSE, INTENSE PLUS, EXTREME, and DRY ONLY • Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH, OVERFLOW, LIQUID DETERGENT and RINSE AID
• Two user-set cycle programs
• User-set delayed start (up to 8 hours)
• Type 304, brushed stainless steel door, sides, top, tank, upper and lower wash arms
• Clear tempered safety glass viewing window
• 25-watt interior light
• One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
• No center water distribution tower allowing for greater glassware capacity
• Four leveling feet
• 3/8" IPS inlet fitting for hot tap water connection
• Factory-installed drain hose and band clamp
• Two year warranty on parts and labor
• Made in the U.S.A.
• Accommodate optional Upper Spindle Rack with additional wash arm and side release latches (sold separately)
• Accommodate optional SteamScrubber Upper and Lower Racks (sold separately)

Compliance
• UL 61010-1