Beckman Coulter Airfuge with digital speed readout

san jose laboratory equipment and repairsan jose laboratory equipment and repair

Manufacturer: Other

Model: Alt-132

This unit has been thoroughly tested and calibrated to ensure proper operation.  Unit comes with a 90 day warranty.  Extended warranty available.
 
With the ability to provide a simple, rapid method of removing chylomicrons (fat particles in lipemic samples), the Airfuge® CLS delivers accurate results for lipemic clarification. Lipemic samples can be cleaned in 10 minutes, eliminating the need for sendouts.
Features:
The easy-to-operate tabletop centrifuge:
 

  • Reaches top speed in as little as 30 seconds.
  • Decelerates smoothly to help keep sample contents separated.
  • Operates just a few degrees above ambient temperatures.
  • Offers run timed runs up to five hours, with hold position for long runs.

The Airfuge® CLS offers enhanced versatility with a variety of rotors:
 

  • Batch rotor pellets particles from a large sample.
  • Electron microscopy particle-counting rotor (EM-90) sediments particulates from very small volumes onto supports suitable for insertion into an election microscope.
  • Four fixed angle rotors (A-110; A-100/18; A-100/30; and A-95) generate the high speeds and forces necessary to perform a variety of tasks.

Airfuge® Air-Driven Ultracentrifuge. Requires 42psig (290 KPa) aire pressure at 0.0016 cubic meter/s (3.5 scfm) for routine operation. Connecting hose and air filter included with instrument.
 
UNSPSC:
41103901
Height:
20 cm (8 in)
Width:
28 cm (11 in)
Depth:
38 cm (15 in)
Weight:
10.4 kg (23 lb)
Approximate Acceleration Time:
30 to 60 sec
Approximate Deceleration Time:
2.5 to 5.5 min
Electrical Requirements:
50 Hz, 100 or 220 to 240 VAC; 60 Hz, 120 VAC
Set Time:
to 5 hr in 5-min increments or continuous (hold)
Speed Range:
80,000 to 110,000 rpm
Pollution Degree:
2
Finish:
Control panel: coated polycarbonate. Top surface: urethane paint. Other surfaces: general purpose paint.

$4,500.00

Specifications

f:f